Servicing and recertification plays a vital role in maintaining safe operations. When it is time to inspect, recertify and/or repair your safety equipment, LHR has you covered. Our safety equipment services include 3M™ DBI-SALA® and Protecta® self-retracting lifeline, winch and descent device repair and recertification; MSA and BW Technologies portable gas detection repair, calibration and inspection; and Billy Pugh X-904 transfer device refurbishment.. All LHR service technicians are factory trained and certified. Each piece of equipment that is serviced is returned with applicable certification.
Additionally, as an added value service, we also offer embroidery services for FR clothing purchased through LHR.
Servicing and inspection of mechanical fall protection devices, such as self setracting lifelines (SRL’s) are important requirements of any effective safety program. The frequency of servicing and inspection as well as who should perform these activities are critical issues. All fall protection equipment, including SRL’s, should be inspected before each use. If inspection reveals a defective condition, the SRL should be removed from use and repaired / serviced.
LHR is a 3M™ DBI-SALA® and Protecta® Houston factory certified repair facility. Our full service service station provides repair and recertification on all 3M™ DBI-SALA® and Protecta® self-retracting lifelines, descent devices, confined space winches and tripods. Following all repairs and inspections a certificate is issued to verify completion of the factory authorized recertification.
Gas monitoring instruments are designed to protect personnel from unseen hazards that may exist in workplace environments, including confined spaces. It is vital to worker safety that these instruments are maintained and calibrated properly. Most manufacturers recommend gas monitors be recalibrated every 180 days.
LHR offers in-house repair and calibration services for BW Technologies and MSA brand portable gas monitors. The only way to guarantee that an instrument will detect gas accurately and reliably is to test it with a known concentration of gas. LHR’s services include exposing the instrument to a known concentration of test gas to show whether the sensors respond accurately and whether the instrument alarms function properly. Regular calibration with a certified standard gas concentration will update the instrument’s reference point, ensuring that the instrument will produce continued, accurate readings.
Bill Pugh recommends an approved manufacturer representative inspect the X-904 every two years. LHR is an approved to refurbish and recertify Billy Pugh X-904 Personnel Transfer Devices. LHR understands that each onsite personnel transfer must be completed in
the safest manner possible. And to ensure that occurs, every
refurbished X-904 is repaired to the same standards to which a new X-904 is
Inspection includes thoroughly examining all parts of the transfer device for any damage or defect on all parts of the unit, loosening and tightening the center pole and swabbing the threads with lubricant to prevent seizing; inspecting the X-904 Personnel Transfer unit for modifications or non OEM supplied components and removing them; and replacing all defective or worn parts as required.
Following inspection and refurbishment, a new certificate of conformity will be issued.
We provide direct embroidery customization for all FR clothing purchased from LHR, including Ariat, Carhartt, LAPCO and Wrangler FR products. Our in-house team features talented Digitizers who can transform your logo into exquisite stitch work. We offer company programs to ensure your industry FR clothing including shirts, jackets, vests, coats, bib overalls, coveralls and insulated coveralls are personalized according to company branding requirements.